Ignition Power Continental GT

Description

Correction:
Compatible with all years of Royal Enfield Continental GT 535.
The interface has a pre-built format on years and models covered. It is not accurate for the Royal Enfield brand.
Contact me for more information here or the ACE Motors website, acemotorsonline.com.
This kit consists of two new coils, spark plug wire, and a NGK spark plug cap.
The DynaTek coil is an improvement over the stock Royal Enfield coil. These are sold in pairs. They can be used on the stock single plug cylinder head. This kit will have forward compatibility with the ACE Motors Fireball 3 cylinder head, a dual plug cylinder head.
You will have to mount this coil. It will not fit where the small stock coil was. Pictured are two different mountings. One uses a mount plate on a GT equipped with an ACE Motors Fireball head. The other one is on a stock head, using one coil. See the pictures.
The spark plug wires are zero resistance, as are the NGK spark plug caps. The wires are cotton-braided and lacquered. Modern, stranded copper conductor with PVC insulation for top performance. Wires are 48" of 7mm plug wire with rajah clips for your spark plugs. Also, there's a pair of rubber boots and a pair of high tension terminals. Clip the wire to length, put the boots and terminals on the ends and install on your coil.
In stock now are
Red w/Black & Yellow Tracers and
Green w/Yellow Tracers. Add a week for delivery time if you choose another color scheme.
The parts are:
DyanTek Coils
Spark Plug Wire
Red w/Black & Yellow Tracers.
Green w/Yellow Tracers.
Oak w/Red & Black Tracers.
Yellow w/Black & Red Tracers.
Black w/Red Tracers.
Black w/Orange Tracers.
NGK Cap LZFH 8381
Have a question? Please ask!