Farm Straw Fodder Crusher Integrated Machine for Cutting Grass Kneading Silk220V

Description

Farm Straw Fodder Crusher Integrated Machine for Cutting Grass Kneading Silk 220V
This machine adopts chain automatic feeding and is suitable for cutting and kneading crops such as grass, corn stalks, sorghum stalks, wheat straw, rice straw, straw, etc. The cutting and kneading process can be adjusted in length. The hard stem nodes on the surface of the straw are destroyed through the cutting and kneading process, and the processed feed becomes soft and filamentous without hard nodes. This improves the taste of livestock and poultry ingredients such as cows, sheep, chickens, pigs, geese, rabbits, and improves the feed utilization efficiency of livestock and poultry, It is a necessary straw kneading mechanical equipment for farmers and small and medium-sized feed processing factories.
Voltage
：
220V
Power:
3KW
Capacity:
Crush
：
500kg/h
Cutting Grass:2-3.8T/h
The Knife:
6-Blade+Serrated Knife
Applicable :
Farms  Home
Shakelon dust collector, dust-free
operation, improves working
environment.
The discharge port can be
adjusted to adjust the discharge
size as required.
Adjustable gear, convenient and fast.
Integrated molding fan, the
working diameter is larger, the
wind is larger.
Thickened galvanized conveyor
chain, automatic feeding, safe and
efficient, dry and wet dual use.
The feed port for grains is
provided with a splash damper
Cyclone Crescent knife set, grain
pulverized, fast and fine.
6 Knife high hardness blade,
9CrSi hardness: HRC55 degrees,
easy to cut, high efficiency.
Adjustable feed port to control feed
speed at any time.
Feeding pressure roller,
automatic feeding, convenient
and fast.
Precautions:
1.Before using this machine, it is necessary to conduct a comprehensive inspection and adjustment to ensure that all
connections are secure and reliable, and all rotating parts must be filled with lubricating oil.
2.Before starting the motor, jog it first to check for any abnormal collision sounds. At the same time, observe whether the rotor
direction is consistent with the arrow direction marked on the body. Then, start the machine and idle for 5-10 minutes, and
wait until everything is normal before feeding and working normally.
3.Apply lubricating grease evenly to the rotating gears and transmission chain wheels every 12 hours of operation, and apply
grease to each operating part of the machine every 24 hours of operation.
4.When the work is about to stop, the machine should idle for 3-5 minutes to remove any remaining materials from the body.
After cleaning the machine, lubricate and maintain all rotating parts.
Warn
Single-phase motor current is relatively large, 3 kw motor please use more than 4 square copper wire, wiring must be firm, it is recommended to use 63 Ann air switch, please do not use ordinary plug socket, so as not to current enough to lead to capacitor or motor burn out! (Please strictly follow the above tips!)
On Feb 22, 2024 at 08:45:12 PST, seller added the following information: