2015-2020 Optima Sonata Shark Fin Antenna Cover New Genuine Kia Ebony Black EB

Description

Brand New in Genuine Kia Box
Shark Fin Antenna Cover / Cover Only
Factory Pre-painted in Ebony Black Color Code EB
Part number 96219-D5000EBQK
Fits on
Kia Optima 2014 through 2020
Without GPS
Hyundai Sonata 2015 through 2019
Without GPS
Genesis Sedan G80 2015-2016-2017 Without Sunroof
Genesis Coupe 2013-2014-2015 Without GPS
Hyundai Elantra Sedan 2011 through 2016
For antennas that don't have a green fin circuit board
Part is in stock and will be shipped out the same or next day max
No need to remove the headliner to screw the cover in.
Loctite 4090 Epoxy or equivalent product is recommended to secure the antenna cover
Service Procedure:
1. Carefully separate the antenna cap from the base when broken or loose. Note: If the antenna cover is missing, confirm proper antenna operation. If antenna is operating properly, proceed to step 2.
2. Remove any remaining plastic remnants from the screws at the antenna base and then using regulated shop air, gently blow and clean the rubber padding of the base.
3. Using the adhesive kit provided to your dealer, apply a small amount of adhesive over the five screws at the antenna base, enough to cover the screw holes.
4. Apply a continuous line of adhesive onto the antenna cap channel as outlined in photo, to ensure proper sealing. Do not use too much silicone epoxy or the material may squeeze out during the cover installation.
5. Carefully align and place the antenna cap over the antenna base. Firmly hold the cap onto the base for fifteen (15) seconds.
6. Wipe off any excess adhesive and ensure the antenna and surrounding areas are clean.
7. Remove adhesive tip and discard. Replace the original adhesive cap back onto adhesive tube for future use. Store the tube in a sealed zip-lock bag or container.
8. Verify proper operation of the radio.